My Math Forum  

Go Back   My Math Forum > Science Forums > Physics

Physics Physics Forum

LinkBack Thread Tools Display Modes
February 26th, 2015, 02:46 AM   #1
Joined: Feb 2015
From: US

Posts: 2
Thanks: 0

Tensile Stress

Determine the tensile stress in the bolted connection shown below for the load F = 210 kN. Using a safety factor of 2, determine whether the plates will fail or not if the yield strength of the plate material is 270 MPa and the thickness of the plate is 12 mm. The nominal diameter of the bolts is 10 mm and the clearance holes in the plate are drilled 10.5mm diameter.

Last edited by I00; February 26th, 2015 at 03:23 AM.
I00 is offline  
February 26th, 2015, 03:21 AM   #2
Senior Member
Joined: Apr 2014
From: Glasgow

Posts: 2,156
Thanks: 731

Math Focus: Physics, mathematical modelling, numerical and computational solutions
1. Please post the diagram.
2. Please post your current attempt at doing this problem.
Benit13 is offline  

  My Math Forum > Science Forums > Physics

stress, tensile

Search tags for this page
Click on a term to search for related topics.
Thread Tools
Display Modes

Similar Threads
Thread Thread Starter Forum Replies Last Post
how to find max shear stress at a given point? Ganesh Ujwal Physics 1 August 26th, 2014 08:42 AM
Stress compound cylinder problem jakeward123 Physics 1 November 12th, 2011 07:12 AM
Stress return mapping algorithm de_wight Math Software 1 July 12th, 2011 12:03 AM

Copyright © 2019 My Math Forum. All rights reserved.